freezing floor in room above garage - help

Joined
2 Mar 2004
Messages
109
Reaction score
0
Country
United Kingdom
Hi gents - we've just moved to a new house and my daughters room is the one above our garage. The garage has a new looking plasterboard ceiling, but the floor in the bedroom above is very cold (noticeably colder than other rooms in the house)

I'm happy to pull down the plasterboard ceiling in the garage but want to know the best way to sort it out for next winter ie/ whats the best insulation to stuff in before replacing new plasterboard ceiling back up

thanks in advance
 
Sponsored Links
fibreglass loft insulation.

If you can the the floor up above, that will be easier than having the ceiling replastered (you can run cables foir any additional sockets or lights, and move the radiator pipes at the same time if you want.

Integral garage ceilings have to be double thickness plasterboard, I think, as fire protection.

I notice B&Q are flogging the remains of their loft rolls at half price this week. This is soft fibreglass with a plastic film cover to protect your skin and lungs from stray fibres.

Check for any gaps allowing draughts and mice through, and seal them up. Injectable foam is handy for draught gaps.
 
suspect it a combination of draughts and more outside area than other rooms with a lack of insulation all round

i pesonaly doubt the floor is the only[main] cause is there a good carpet fitted tight to the skirting!!!!!!
 
thanks gents - well we've already fully decorated the bedroom so dont want to take up the newly layed carpet etc - so only way really is to pull down plasterboard ceiling in garage and insulate from there before replacing plasterboard it seems .

and yes there is a brand new very thick professionally laid carpet fitted tight to skirting

cheers guys any further tips welcomed
 
Sponsored Links
i wouldn't think twice about pulling down a ceiling as opposed to ripping up a floor and skirtings in a furnished room. the floor lifting option is a heck of lot more difficult believe me!

as JohnD says, full fill the void with quilt insulation, as this will help reduce noise too.

......mind you, it would be a whole lot nicer to fit the inso' from above. ;)
 
You don't need double thickness plasterboard, just special fire rated plasterboard. Insulate from below, but remember to allow some air circulation. Rooms above garages are notorious for being cold.
 
.......actually you don't need fireline boards unless stated. a standard half hour fire rating can be achieved with 12.5mm boards and skim.

this was verified, applied and passed recently.
 
Fix celotex to the existing garage ceiling and board over that :idea: Unless it`ll interfere with the door opening :oops:
 
Nige F said:
Fix celotex to the existing garage ceiling and board over that :idea: Unless it`ll interfere with the door opening :oops:

Thats exactly what I would do , but before that , i would run a perimeter mastic seal to exclude draughts
 
thats fine .

Its a pity you arent so keen to moderate the poor and innacurate info that some members post here as the gospel ,

I would have hoped that the ideal of the moderator was to protect the innocence of those asking questions here , rather than those who preach innacuracies .

keep an eye open , you do yourself no justice by ignoring the problem.

I did try to delete my account from here to avoid any association , but it doesnt let me , any help you can provide with that would be much apreciated .
 
thanks guys

so this celotex stuff - is it just a board like plasterboard type stuff ???

and are you saying that it will be ok just to screw celotex to my existing plasterboard ceiling and then replasterboard over ???

without ripping old ceiling down and adding fibreglass first ??
 
building control officers prefer the use of fibreglass quilt type insulation, in this particular scenario, simply because it adds noise deadening as well as thermal protection.

all the bc's round staffs insist upon quilt between garage and bed above.

i agree the rigid boards i.e. cellotex, kingspan etc provide a better 'u' value but cannot compete with the acoustic side of things.
 
so would the ultimate warmth and sound deadening scenario be both ???

if so I might go for that then or is that too over the top ?
 
I wouldnt consider it over the top , i see both as the perfect scenario.

Just that adding celotex over the top , is an easy fix
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top